Type 412 Mining Armored Feeder Cable 1.1kv
Type 412 Mining Armored Feeder Cable 1.1kv Application
These type 412 cables with green/yellow earth and pliable armor for mechanical protection may be used in applications where damage is likely and armor can reduce cases of costly downtime, suitable installed as feeder cables in sand mining operations.
This pliable armored cable used as a feeder in areas where high impact resistance is required. Not suitable for use in underground coal mining applications.
Type 412 Mining Armored Feeder Cable 1.1kv Standard
AS/NZS 1125,
AS/NZS 3808,
AS/NZS 2802,
AS/NZS 5000.1
Type 412 Mining Armored Feeder Cable 1.1kv Construction
Type 412 Mining Armored Feeder Cable 1.1kv Construction
| 3×Conductors | Flexible stranded tinned annealed copper conductor. |
| Insulation | EPR. |
| Insulation Screen | Semiconductive elastomer. |
| Filler | Elastomer center filler. |
| 3×Interstitial Earth Conductor |
EPR covered flexible stranded tinned copper conductor. |
| Inner Sheath | PCP sheath. CPE/CSP sheath can be offered upon request. |
| Pliable Armour | Galvanized low carbon (mild) steel strands. |
| Outer Sheath | Heavy duty PCP sheath. Heavy duty CPE/CSP sheath can be offered upon request. |
Type 412 Mining Armored Feeder Cable 1.1kv Technical Data
| Voltage Rating | 1.1kV |
| Operating Conductor Temperature | -25 to 90°C |
| Emergency Conductor Temperature | 130°C |
| Short Circuit Conductor Temperature | Max. 250°C for 5 sec |
| Max. Working Tension | 0.02kN/mm² (total) |
Type 412 Mining Armored Feeder Cable 1.1kv Specification
| Nominal Conductor Area |
Insulation Thickness |
Earth conductor Thickness of Covering |
Pliable Armour Size |
Nominal Overall Diameter |
Nominal Weight |
| mm^2 | mm | mm^2 | No/mm | mm | kg/100m |
| 16 | 1.6 | 0.6 | 7/0.90 | 38.3 | 265 |
| 25 | 1.6 | 0.6 | 7/0.90 | 38.4 | 294 |
| 35 | 1.6 | 0.6 | 7/0.90 | 44.6 | 402 |
| 50 | 1.7 | 0.8 | 7/0.90 | 49.2 | 500 |
| 70 | 1.8 | 0.8 | 7/0.90 | 55.4 | 655 |
| 95 | 2 | 0.8 | 7/0.90 | 60.1 | 775 |
| 120 | 2.1 | 1 | 7/0.90 | 68.1 | 990 |
| 150 | 2.3 | 1 | 7/0.90 | 73.8 | 1186 |
| 185 | 2.5 | 1 | 7/0.90 | 80.2 | 1360 |
| 240 | 2.8 | 1.2 | 7/0.90 | 88.7 | 1670 |
| 300 | 3 | 1.2 | 7/1.25 | 100.9 | 2200 |
Please note that the above specifications are “general specifications” that pertain to the majority of our production. These specifications should only be used for general, informational purposes. All dimensions and specifications are nominal and are subject to normal manufacturing tolerances. All specifications are subject to change without prior notice. All pictures shown are for illustration purposes only. Actual product may vary.
Reviews
There are no reviews yet.