NSSHCGEOEU Longwall Coal Cutter Cable(Low Tensile Stress)0.6/1KV
NSSHCGEOEU Coal Cutter Cable 0.6/1KV Application
NSSHCGEOEU Coal Cutter Cables are used for the connection of mobile machines under extremely high mechanical loads, predominantly in mining situations,e.g. for coal-cutting machines, suitable for extreme bending loads under low tensile stress.
The phase-concentric monitoring shield and the common concentric earth conductor, in conjunction with appropriate monitoring equipment, make it possible to monitor the cable for insulation faults and damage resulting from external influences. The cable can be delivered with 2, 3 or 6 pilot cores.
These NSSHCGEOEU cables comply with DIN VDE 0250 part 812 Standards.
NSSHCGEOEU Low Tensile Stress Coal Cutter Cable 0.6/1KV Construction
| Conductors | Flexible stranded tinned copper conductor. |
| Insulation | Heat resistant 3GI3 rubber based on EPR. |
| Outer Conductor Layer | Easy strippable outer conductive layer. |
| Pilot Cores | Copper strand and steel braid conductor capable of expansion and compression with EPR rubber insulation. |
| Monitoring Conductor | Spiral of tinned copper wires above the pilot cores, covered with a semi-conductive tape. |
| Inner Sheath | Rubber type GM1b. |
| Armor/Earth Conductor | Concentric earth conductor as the spiral of copper and steel wires, fiberglass tape, embedded in the outer sheath which prevents sheath exchanging. |
| Outer Sheath | Rubber type 5GM5, abrasion, and tear resistant, oil resistant and flame retardant. |
NSSHCGEOEU Low Tensile Stress Coal Cutter Cable 0.6/1KV Technical Data
| Rated Voltage Uo/U (Um) | 0.6/1 kV |
| Max. conductor temperature in service | 90°C |
| Max. short-circuit temperature of conductor: | 200°C |
| Limit surface temperature fixed installed | -40°C~ 80°C |
| Limit surface temperature, flexible application | -25°C ~ 80°C |
| Oil-resistance | Yes |
| Flame retardant | Yes |
| Dynamic bending radius | 4(xD) |
| Static bending radius | 1.5(xD) |
NSSHCGEOEU Low Tensile Stress Coal Cutter Cable 0.6/1KV Specifications
| Number of Cores× Nominal Cross Section |
Minimum Overall Diameter |
Maximum Overall Diameter |
Nominal Weight |
| No.×mm² | mm | mm | kg/km |
| 3×16/16KON+2ST+UEL | 35 | 38 | 2130 |
| 3×25/16KON+2ST+UEL | 38 | 41 | 2790 |
| 3×35/16KON+2ST+UEL | 41 | 45 | 3390 |
| 3×50/25KON+2ST+UEL | 47 | 51 | 4340 |
| 3×70/35KON+2ST+UEL | 52 | 56 | 5680 |
| 3×95/50KON+2ST+UEL | 58 | 62 | 7180 |
| 3×25/16KON+3×(1.5ST+UEL) | 38 | 41 | 2920 |
| 3×35/16KON+3×(1.5ST+UEL) | 41 | 45 | 3630 |
| 3×50/25KON+3×(1.5ST+UEL) | 45 | 48 | 4500 |
| 3×70/35KON+3×(1.5ST+UEL) | 48 | 53 | 5850 |
| 3×95/50KON+3×(1.5ST+UEL) | 52 | 56 | 7400 |
| 3×120/70KON+3×(1.5ST+UEL) | 58 | 63 | 8300 |
| 3×150/70KON+3×(1.5ST+UEL) | 62 | 68 | 9300 |
Please note that the above specifications are “general specifications” that pertain to the majority of our production. These specifications should only be used for general, informational purposes. For the actual specification, please check with us when order placed.
Reviews
There are no reviews yet.